PDA

View Full Version : 20's Question


DAZE752
12-16-2008, 02:49 AM
OK I am planning on running 20's but the offset is 38+ would they tuck or they have to have to be a 40+ to tuck?
I am very confused on this behalf

nickd
12-16-2008, 01:33 PM
you may be able to get away with a 38 offset but you will need for sure to slightly flare the rear bed sides and for sure 4x4 front fenders up front. i had a set on mine for a few days to try them out and they worked but just barely out back.

ScottXGTR
12-16-2008, 10:48 PM
the difference between +38 and +40 is only 2 mm. you can pull on the fender with your hands and flare that much. you should be fine.

pugz
12-17-2008, 12:52 AM
yes +38 will be fine. youll have to pull the rear fenders a lil more. i had to pull mine on my froniter with +40 offset. but you should have no(major) problems as long as the arent wider than 8.5 wide

hdoggie24
12-17-2008, 01:22 AM
would this size rub if you lay it out with a bodydrop or should you also be fine? the top of rear fender bulge starts to taper in towards the top. wanna know if that would hit the top of the tire when slamming it down.