Dropped my G today

[pugz]

ill get better pics this weekend. 1.4" front drop and 1.3" rear. simple eibach prokit. nothing crazy

http://photosbypugz.smugmug.com/photos/i-vfqP3X7/0/L/i-vfqP3X7-L.jpg

itll settle and end up a lil lower im sure, but looks sooooo much better without the big wheel gaps :D :D

http://photosbypugz.smugmug.com/photos/i-msLw5Bm/0/XL/i-msLw5Bm-XL.jpg

[Flush]

Nice. More. √

[pugz]

ill have more this weekend. im gonna debadge it tomrrow and detail it up for battle drag this weekend.


i gotta get some longer studs and a small wheel spacer for the front now though. and a couple magnaflows to replace the stock exhaust coming up soon too :)

[slyderdai]

Wheel gap is like a vagina, the more fingers you can get in there the worse off you are.

Love the g! Those wheels are real nice.

[sparkinframe]

Wheel gap is like a vagina, the more fingers you can get in there the worse off you are.

no truer words have been said.

[pugz]

Lmao.

Ive only put 15 miles on it since i did the suspension last night so its hasnt fully settled. Right now its about an inch or gap. Id like a lil less but dont want it to ride like shit on this one. If i go lower itll be bagged or juiced

[Flush]

Another 1/2 an inch wont hurt the ride quality. Im not saying you should be tucking, but just close the gap a little more.

It looks dope either way though.

[pugz]

Ya, im waiting to see how it settles over the weekend. Ill put some mileage on it and see how it is on monday. And then check the alignment again to see if i need the camber kit. Its at -2 degrees right now on all 4 corners, and 0.08 degrees of toe

[RedAggie03]

I think it's perfect. Sporty but not ghetto. Don't go lower. I went lower on my TL and hated it...I'm running the Eibachs now too.

[pugz]

debadged and de-pinstriped the car today. much cleaner now. and also you can tell the car has settled a good 1/2-1" more :D :D

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/315608_2029038370037_1366415905_31815032_590447204 _n.jpg


will get better pics at battle drag this weekend.

next mods: custom magnaflow exhaust, and paint the grille black or buy a billet front grille and bumper inserts

[1800bucks]

It has a perfect stance now. Nice wheel and tire combo too. I went with H&R for my '01 Maxima. I put the fronts on only and kept the factory SE springs in the rear. I'd like to go lower, but I need to get in and out of my driveway.

[pugz]

ya, i read on hte g35 forums abotu the differences between these and the h&r's, everyone says these ride better but have just a lil less drop than the h&rs. alot of the hr guys have switched to either these or real coilovers. if i were to go lower itll be with air or juice

[pugz]

heres a better pic from the show. i think im going to take off the last emblem tomorrow.

http://photosbypugz.smugmug.com/Cars/G-Ride/i-dkZmvv3/0/L/IMG1942-L.jpg

http://photosbypugz.smugmug.com/Cars/G-Ride/i-GWTkCKT/0/L/IMG1941-L.jpg

[JunYa]

I like the badge on there. Hell I love this car lol

[pugz]

thanks man. i love my car now. still needs to be bagged though

[yourbestbetx3o]

that car is beautiful!

[pugz]

i hated the chrome grille on my car so i decided to paint it today. still gotta let it dry all night and ill put it on in the morning.

i read on all the g forums that everyone uses plastidip to do theirs, so since once it dries if it looks dumb it can actually be peeled off. i did 5 light coats of the plastidip and then topped it with 4 light coats of high gloss black to give it a lil shine.

all in all, im happy with the way it came out. cant wait to see it put back in the car

http://photosbypugz.smugmug.com/photos/i-MVL7CR2/0/L/i-MVL7CR2-L.jpg

[1low96hb]

Looks good man! Did you have to scuff it down or primer it or anything first?

[pugz]

no, with the plastidip only need to clean the surface first.


grille is back installed and looks so much better now. since the plastidip has a slight texture to it, it looks like factory black plastic really.

anyone know about using drive through carwashes with the plastidip? will it hold up? i usually hand wash it but i drive through sometimes.

anyway here it is installed back in the car

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc7/295702_2050849075291_1366415905_31830928_120431913 7_n.jpg

and a close up shot.

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/317756_2050850875336_1366415905_31830931_103143093 2_n.jpg

[fbccars924]

be careful with drive through car washes. If you have to use one makesure theyre brushless. Those brushes will kill your paint over time.

[98frontie]

That's looking good, I lobe those cars!

[jcjcsoccerkid]

clean and elegant

[pugz]

thanks. i want to do an exhaust next, but jsut had a couple people hit me up on the 2 sets of wheels i have forsale. if i can somehome sell both sets real quick, i might end up just bagging the car :D, i seriously doubt itll happen but i can dream right? lol

[pugz]

decided to go emblemless. well except the one on the grille. cant get rid of that one till i get a billet grille.

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/314479_2064685661197_1366415905_31839378_104726044 5_n.jpg



now to paint that chrome trunk lip white to match the car, and paint all the chrome trim black around the windows, new exhaust coming real soon. then who knows what ill end up doing. i said i was gonna leave this stock, but stock sucks.

[$krap_IN_flesh]

I've never been able to leave anything stock for to long

[pugz]

im pretty sure im gonna bag it now. lol. pretty soon too

[BAGLESS (PATRICK)]

...or you can juice it Pugz :D...and it'll lay lower ;)...you know you want to do it...haha... The G will look sick either way...

[pugz]

the air setups on these lay out well.

this one is on a U.A.S. kit and accuair e-level.

http://www.vossenwheels.com/Gallery/FileUpload/Gallery/l_Infiniti_G37_VVS082_9ec.jpg

[RedAggie03]

...finish your Pathy first.

[Scrappy]

^^^What He Said ^^^

[pugz]

Uhhhh.....

[Ven]

Build this and scrap the pathfinder, I will haul it and all its parts off for you FREE of charge!

[pugz]

lmao... ill sell you the pathy and all its parts. but nothing in life is free, hahahaha

[onelozu]

lay out the g first!! everyone needs a sick daily lol

[Slay0r]

J, whats the PPI on those coils? the eibachs on my Xrunner were 950ppi. I think my evo coils are only 210. Its crazy, just making sure ur spine wont come through yo head

[pugz]

Idk what the ppi is, they are the springs made for the car, and they are stiffer than stock, but its not bad unless its a really bumpy road

[Bodhi]

Wheel gap is like a vagina, the more fingers you can get in there the worse off you are.


LoL Awesome! :rofl:

Looks Great Man!!