mahikoa
08-13-2011, 08:26 PM
http://infamousnissan.com/forum/picture.php?albumid=1254&pictureid=9368
After eskies and lowering it with torsions and heated springs
http://infamousnissan.com/forum/picture.php?albumid=1254&pictureid=9371After titans and lowering it some more with torsions and correcting camber with upper control arm shims and traded old coil springs out with some mustang lowering coils
I picked this pathy and a fourwheel drive pathy up for eight hundred bucks, parted out the 4x4 for some extra cash and what i needed then scrapped the rest for some more cash. After all was said and done with the 4x4 i figure i prolly only gave 250 for this and a shit ton of extra goodies. I started out by putting in a cheap walmart system someone gave me then traded it for a set of eskies becausr it was just to loud for my babies. Right after i got the eskies and had some smaller tires mounted on them i lowered it probably four inches all the way around thats tire size and suspension. I rode it like that for around a year now i just got a set of 18" titans and did a lil work to make them fit and lowered it alot more to give it the stance its at now. I used torsion bars and mustang lowering coil springs in the rear. I have all the goodies necessary to bag it. (which were also given to me or laying around from previous builds) My biggest problem now is that i dont have access to a welder which is my biggest downfall. I just moved to a new city/state and dont really know anyone i can borrow one from so gonna have to wait it out and save and buy one which i need to do anyways. Hopefully ill be able to purchase one soon but its hard to save when you have three kids, but i will be slowly messing with the truck here and there and will be keeping updates on the site.
After eskies and lowering it with torsions and heated springs
http://infamousnissan.com/forum/picture.php?albumid=1254&pictureid=9371After titans and lowering it some more with torsions and correcting camber with upper control arm shims and traded old coil springs out with some mustang lowering coils
I picked this pathy and a fourwheel drive pathy up for eight hundred bucks, parted out the 4x4 for some extra cash and what i needed then scrapped the rest for some more cash. After all was said and done with the 4x4 i figure i prolly only gave 250 for this and a shit ton of extra goodies. I started out by putting in a cheap walmart system someone gave me then traded it for a set of eskies becausr it was just to loud for my babies. Right after i got the eskies and had some smaller tires mounted on them i lowered it probably four inches all the way around thats tire size and suspension. I rode it like that for around a year now i just got a set of 18" titans and did a lil work to make them fit and lowered it alot more to give it the stance its at now. I used torsion bars and mustang lowering coil springs in the rear. I have all the goodies necessary to bag it. (which were also given to me or laying around from previous builds) My biggest problem now is that i dont have access to a welder which is my biggest downfall. I just moved to a new city/state and dont really know anyone i can borrow one from so gonna have to wait it out and save and buy one which i need to do anyways. Hopefully ill be able to purchase one soon but its hard to save when you have three kids, but i will be slowly messing with the truck here and there and will be keeping updates on the site.