shaved door popper location

[hardbodymodder]

hey guys...I searched all over this forum for a topic about door popper location and could not find a thread....so I need to know how some of you guys mounted your door poppers on your shaved doors.... I have Godfather customs 35lb popper (from my buddy INISSAN) also how did you connect to the lock mechanism? any help would be greatly appreciated!!

[TwIzTeDfRoNtIeR]

are you talkin about the poper to push the door out or selinoid that opens the latching mechinism

[hardbodymodder]

solenoid that opens the latch....

[drewcula]

On my frontier behind the door panel there is a black metal panel that doesn't really serve any purpose, so I just bolted mine to that plate on the inside.

[yeti_'87HB]

i have mine behind the door panel, right above where the armrest/grab handle screws into

[TwIzTeDfRoNtIeR]

i did an install on a hardbody, i put it on the backside of the panel. between the metal and th eglass

[88hb]

make sure you get a small enuff solenoid so that it fits between the inner door and glass, im using the older spal kit, the only difference from the new ones is the internal relays on the brain. solenoids still look the same.

[ScottXGTR]

a good thread:
http://www.infamousnissan.com/forum/showthread.php?t=175

[yeti_'87HB]

WHAAAAT!!!, the new spal kit has internal relays? does that mean you only have to give it a 12V source, ground, and hook up the power wire to the solenoid? instead of have 3 or 4 of those 5 prong individual square relays?

[88hb]

WHAAAAT!!!, the new spal kit has internal relays? does that mean you only have to give it a 12V source, ground, and hook up the power wire to the solenoid? instead of have 3 or 4 of those 5 prong individual square relays?

yup..

[yeti_'87HB]

F**K ME!!! i spent almost $400 CDN for a full autoloc kit, none of the relays worked, i bought it in september, had trouble with it, and put it away, i wish i had of bought one of the spal kits...ANYONE WANT TO BUY AN AUTOLOC SHAVED DOOR KIT!!! lol

[jcjcsoccerkid]

i have the spal kit, it was really easy, mine are midway up the door where there's more space between the window and the panel.

and my solenoids dont have relays, just 12v and ground

[Swschz]

mine are about halfway along the length of the door and about speaker height.facing vertically.

solinoids have a inner and outter cable similar to a handbrake.

then i have a small bracket that holds the end about where the screw comes through for bolting the pull handle on so its then facing inline with the interior door handle rod.

[sparkinframe]

:pics: