94 HB EXT Cab Stock Floor questions

[thatboi_j]

I am reading through the threads on D21 stock floors...what size metal are you using for your frames? I assume 2x3 but what thickness? Thanks!

[xmb63]

Im using 2x3x3/16

[88hb]

Im using 2x3x3/16

that's what i used for my balk half, and will use i for a stock floor in the future.

[stylin-t1]

I have 2"x3"x1/4" for mine

[drginazzhb92]

thats what i'm useing for my back half

[97xenissan]

the factory frame is 1/8" so 3/16" should be more than enough.

[thatboi_j]

I appreciate everything! Now I have to face the evil body mounts :( That has been my only fear ha ha

[stylin-t1]

I appreciate everything! Now I have to face the evil body mounts :( That has been my only fear ha ha

I would make your own body mounts on A stock floor that have better clearence than the stock ones. Similar to this one.

http://image.minitruckinweb.com/f/8529169/0509mt_chas_05_z.jpg

[thatboi_j]

I'm confused on that pic. What are you saying? Sorry to be so dumb...but I am new to this lol

[GutterHXCGrowl]

Hes saying make new body mounts with more clearance then the stock ones, much easier then trying to reuse the stock ones.

[thatboi_j]

Oh ok...i'm planning on fabricating some and using adjustable mounts

[madroxx]

adjustable body mounts? doesnt sound to safeable....lol...

[thatboi_j]

I am just using the adjustable function to ensure the cab is exactly where I want it...then I am going to weld them solid.

[xmb63]

That seems like more work than its worth. You could use washers to adjust the cab if needed.