z24i redline?

[Freak]

got an aftermarket tachometer installed recently and was wondering what the factory redline was for the z24i (its a 1987 5 speed if that matters)

[lomofo11]

I dont know what the factory redline is but I installed one in a buddies '89 with a z. We pegged it to 6700rpm drifting it! Haha! You shouldn't go that far at all. Way out of the powerband but we didn't care, it was a beater. I know the sohc ka's in our truck is 6000. Although the powerband peaks at 4800rpm.

[ShortyzKustomz]

I wouldnt go over 6 these are all truck motors, They dont make any power up high anyway

[yeti_'87HB]

does the Z24 motor have a tachometer signal port. i'm hooking up a tach today and it would make it easier if there is

[Hajile]

I dont know what the factory redline is but I installed one in a buddies '89 with a z. We pegged it to 6700rpm drifting it! Haha! You shouldn't go that far at all. Way out of the powerband but we didn't care, it was a beater. I know the sohc ka's in our truck is 6000. Although the powerband peaks at 4800rpm.

my ka redlines at 6500

[Rocket]

my z24 carb hits 100 km in second.. then i change

tacho is fucked

[redneck_racing]

if i remember right the z24's redline at 5500rpm stock.

[89miNISSAN808]

i got a 89, i got a autometer tach, and my redline is 6.5

[yeti_'87HB]

i need to get an answer for this. do the Z motors have a direct tach signal port in either the ECU or ECM?

[89miNISSAN808]

i did mine from behind the gauge cluster
im serious tho, its 6.5