need help on changing water pump

[93nissan]

any tips? diagrams? thanks

[Swschz]

what engine have you got

did mine on a diesel motor.

was a simple case of unbolting all the stuff in the way to get acess.takign water pump off.cleaning off the old gasket and surrounding area,bolting up new water pump and supplied gasket,reinstalling all parts you removed and your good to go.

[93nissan]

yea i got a 2.4L i ahd a chilton but lost it moving or sumthin sux

[vidraggin]

I've done a couple of the z24 motors. Once you take the shround off, I have found that a small 1/4 drive socket and rachet to take off the fan first is a must. The rest of the bolts come out fairly straight forward. Make sure that you have the Antifreeze drained first so that it doesnt go everywhere. I would also suggest a drip pan if you have alot of animals around. There are going to be some bolts that you cannot remove due to the belt pulley.. Thats ok as the replacement has those included, just be sur eto keep the ones you can. I hope that helps some.

[Leady2]

remove the shroud, fan, belts, fan clutch, then water pump, and gasket. And reinstall water pump with new gasket, fan clutch, belt, fan, shroud.

should be the right order.